View ECWU1104V33_7061406.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

plastic film capacitors design specifications are subject to change withou t notice. ask factory for technical s pecifications before purchase and/or use. whenever a doubt safety arises from th is product, please inform us immediately for technical consultation without fail. stacked metallized pen film chip capacitor type : ecwu(c) stacked metallized pen film as dielectric with simple mold-less construction features small in size for reflow soldering rohs directive compliant recommended applications general purpose (coupling, by-pass) explanation of numbers specification category temp. range (including temperature-rise on unit surface) - 55 c to +125 c rated voltage 100 vdc, 250 vdc, 630vdc (derating of rated voltage by 1.25% / c more than 85c) 100 vdc 0.012 f to 1.0 f (e12) 250 vdc 0.0010 f to 0.12 f (e12) capacitance range 630 vdc 0.022 f, 0.027 f, 0.033 f 100 vdc 5 %(j), 10 %(k) ( c R 0.18 f 10 %(k) only) 250 vdc 5 %(j), 10 %(k) capacitance tolerance 630 vdc 5 %(j) withstand voltage between terminals rated volt. (vdc) 150 % 60 s dissipation factor (tan ) tan ?Q 1.0 % (20 ,1 khz) c Q 0.33 f 100 vdc, 250 vdc, 630 vdc ir R 3000 (20 , 100 vdc, 60 s) insulation resistance (ir) c 0.33 f 100 vdc ir R 1000 m ? f (20 , 100 vdc, 60 s) 100 vdc 250 vdc reflow soldering 240c max. and 60 s max. at more than 220c (temp. at cap. surface ) please consult us for reflow 250 max product. soldering conditions 630 vdc reflow soldering250c max. and 60 s to 150s. at more than 217c (temp. at cap. surface ) *in case of applying voltage in alternating current (50 hz or 60 hz sine wave) to a capacitor with dc rated voltage, please refer to the page of ?permissible voltage (r.m.s ) in alternating current corresponding to dc rated voltage?. *please consult us for capacitance range between 0.15 f and 1.0 f.(250 vdc) 1 2 3 4 5 6 7 8 9 10 11 12 j 5 k 10 dielectric & construction product code rated voltage capacitance cap. tol. suffix suffix 1 100 vdc 2 250 vdc tape width 9 12 mm v 16 mm tape width v 16 mm 1 2 3 4 5 6 7 8 9 10 11 12 dielectric & construction product code rated voltage capacitance cap. tol. suffix suffix 2j 630 vdc j 5 1 2 3 4 5 6 7 8 9 10 11 1 0 4 3 3 1 dielectric & construction product code rated voltage capacitance 1 100 vdc small in size, cap. tol. : 5 , tape width : 12 mm su ffix
plastic film capacitors design specifications are subject to change withou t notice. ask factory for technical s pecifications before purchase and/or use. whenever a doubt safety arises from th is product, please inform us immediately for technical consultation without fail. construction dimensions in mm(not to scale) taping specification for automatic mounting refer to the taping specification. rating dimensions & quantity / reel capacitance tolerance:5 %(j),10 %(k) rated volt. 100 vdc rated volt. 250 vdc dimensions (mm) dimensions (mm) cap. ( f) part no. l w h size code quantity part no. lwh size code quantity 0.0010 ecwu2102 c9 4.8 3.3 1.4 e1 0.0012 ecwu2122 c9 4.8 3.3 1.4 e1 0.0015 ecwu2155 c9 4.8 3.3 1.4 e1 0.0018 ecwu2182 c9 4.8 3.3 1.4 e1 0.0022 ecwu2222 c9 4.8 3.3 1.4 e1 0.0027 ecwu2272 c9 4.8 3.3 1.4 e1 0.0033 ecwu2332 c9 4.8 3.3 1.4 e1 0.0039 ecwu2392 c9 4.8 3.3 1.4 e1 0.0047 ecwu2472 c9 4.8 3.3 1.4 e1 0.0056 ecwu2562 c9 4.8 3.3 1.4 e1 0.0068 ecwu2682 c9 4.8 3.3 1.4 e1 0.0082 ecwu2822 c9 4.8 3.3 1.4 e1 0.010 please use dc100v rating of ecwu(x ecwu2103 c9 4.8 3.3 1.4 e1 0.012 ecwu1123 c9 4.8 3.3 1.4 e1 ecwu2123 c9 4.8 3.3 1.4 e1 0.015 ecwu1153 c9 4.8 3.3 1.4 e1 ecwu2153 c9 4.8 3.3 1.4 e1 0.018 ecwu1183 c9 4.8 3.3 1.4 e1 ecwu2183 c9 4.8 3.3 2.0 e2 0.022 ecwu1223 c9 4.8 3.3 1.4 e1 ecwu2223 c9 4.8 3.3 2.0 e2 3,000 0.027 ecwu1273 c9 4.8 3.3 1.4 e1 ecwu2273 c9 4.8 3.3 2.4 e3a 0.033 ecwu1333 c9 4.8 3.3 1.4 e1 ecwu2333 c9 4.8 3.3 2.8 e3 2,000 0.039 ecwu1393 c9 4.8 3.3 1.4 e1 ecwu2393 c9 6.0 4.1 2.0 d2 3,000 0.047 ecwu1473 c9 4.8 3.3 2.0 e2 ecwu2473 c9 6.0 4.1 2.4 d3 0.056 ecwu1563 c9 4.8 3.3 2.0 e2 3,000 ecwu2563 c9 6.0 4.1 2.8 d4 0.068 ecwu1683 c9 4.8 3.3 2.4 e3a ecwu2683 c9 6.0 4.1 3.2 d5 2,000 0.082 ecwu1823 c9 4.8 3.3 2.8 e3 2,000 ecwu2823 c9 6.0 5.0 3.2 b ecwu1104 c9 6.0 4.1 1.8 d1 3,000 ecwu2104 c9 6.0 5.0 3.8 b 0.10 ECWU1104V33 4.8 3.3 2.8 e3 2,000 ecwu2124 c9 6.0 5.0 4.5 b 1,500 0.12 ecwu1124 c9 6.0 4.1 2.4 d3 0.15 ecwu1154 c9 6.0 4.1 2.8 d4 2,000 0.18 ecwu1184kc9 7.1 5.0 2.0 z 0.22 ecwu1224kc9 7.1 5.0 2.4 z 0.27 ecwu1274kc9 7.1 5.0 2.9 z 0.33 ecwu1334kc9 7.1 5.0 3.5 z 1,500 0.39 ecwu1394kcv 7.7 5.5 3.4 x 0.47 ecwu1474kcv 7.7 5.5 4.0 x 0.56 ecwu1564kcv 9.8 6.3 3.0 v 0.68 ecwu1684kcv 9.8 6.3 3.6 v 0.82 ecwu1824kcv 9.8 6.3 4.3 v 1.0 ecwu1105kcv 9.8 6.3 5.1 v 1,000 size code l w h e1 4.8 3.3 1.4 e2 4.8 3.3 2.0 e3a 4.8 3.3 2.4 e3 4.8 3.3 2.8 d1 6.0 4.1 1.8 d2 6.0 4.1 2.0 d3 6.0 4.1 2.4 d4 6.0 4.1 2.8 d5 6.0 4.1 3.2 b 6.0 5.0 z 7.1 5.0 y 7.1 6.3 x 7.7 5.5 v 9.8 6.3 refer to the column ? rating dimensions & quantity . ( 0.5)** ( 0.4)* l 0.2 ( 0.4)*** w 0.3 h 0.2 ( 0.3)*** 0.35 0.20 0.35 0.20 cap. tol. code element (stacked) outer electrode (lead free) * to be applied only for size z, y, x ** to be applied only for size v *** to be applied only for size b, z, y, x, v cap. tol. code
plastic film capacitors design specifications are subject to change withou t notice. ask factory for technical s pecifications before purchase and/or use. whenever a doubt safety arises from th is product, please inform us immediately for technical consultation without fail. rating dimensions & quantity / reel capacitance tolerance : 5 %(j) recommened for land dimensions(mm) rated volt. 630 vdc dimensions (mm) cap. ( f) part no. l w h size code quantity 0.022 ecwuc2j223jv 7.1 6.3 3.6 y 0.027 ecwuc2j273jv 7.1 6.3 4.1 y 0.033 ecwuc2j333jv 7.1 6.3 5.1 y 1000 land a b c electrode land dimensions reflow soldering size code a b c e1,e2,e3a,e3 2.6 6.6 3.0 d1,d2,d3,d4,d5 3.8 7.8 3.8 b 3.8 7.8 4.6 z 4.5 9.0 4.6 y 4.5 9.0 5.7 x 5.1 9.7 5.0 v 7.2 11.9 5.7
at 1khz temperature( dgree c) at 1khz frequency(khz) at dc 100v ecwu (c) type dc100v series temperature characteristics frequency characteristics electrical characteristics < typical data > ( stacked metallized film) frequency (khz) frequency (khz) temperature (degree c) temperature (degree c) -10 -5 0 5 10 1 10 100 1000 10000 0.012 uf 0.047 uf 0.10 uf 0.47 uf 1.0 uf 0 2 4 6 8 10 -60 -40 -20 0 20 40 60 80 100 120 140 from 0.012uf to 1.0uf 0 2 4 6 8 10 1 10 100 1000 10000 0.012 uf 0.047 uf 0.10 uf 0.47 uf 1.0 uf 0.001 0.01 0.1 1 10 100 1000 10000 1 10 100 1000 10000 100000 0.012 uf 0.047 uf 0.10 uf 1.0 uf 0.47 uf -10 -5 0 5 10 -60 -40 -20 0 20 40 60 80 100 120 140 from 0.012uf to 1.0uf 1. e+06 1. e+07 1. e+08 1. e+09 1. e+10 1. e+11 1. e+12 -60 -40 -20 0 20 40 60 80 100 120 140 1.0 uf from 0.012uf to 0.047uf capacitance change(%) capacitance change(%) dissipation factor(%) dissipation factor(%) insuration resistance(ohm) impedance(ohm)
ecwu (c) type dc100v series applicable specifications ( stacked metallized film) * please consult panasonic if your condition exceeds the above spec. * the current value ( aop ) is calculated using "nominal capacitance." in fact, it changes by the tolerance of a capacitance value, capacitance change, etc. * permissible voltage graph is the case of sine waveform. when you use this product, peak voltage must not exceed dc rated voltage. frequency (khz) permissible current 0.047 uf 0.082 uf 0.068 uf , 0.056 uf 0.039 uf , 0.033 uf 0.027 uf , 0.022 uf 0.018 uf , 0.015 uf 0.012 uf 1 100 1000 effective value (a) 1 0 3 2 10 0.56 uf , 0.47 uf 0.39 uf 0.15 uf 0.33 uf , 0.27 uf 0.22 uf , 0.18 uf 0.12 uf , 0.10 uf 0.82 uf frequency (khz) 1 100 1000 effective value (a) permissible current 1 0 3 2 1.0 uf 0.68 uf 10 ( at sine wave) 0.012 uf 0.015 uf 0.018 uf 0.022 uf 0.027 uf 0.033 uf 0.039 uf , 0.047 uf 0.056 uf 0.068 uf 0.082 uf frequency (khz) 1 100 1000 effective value (v) permissible voltage 10 1 100 10 0.12 uf 1.0 uf 0.82 uf 0.68 uf 0.56 uf 0.47 uf 0.39 uf 0.33 uf 0.27 uf 0.22 uf 0.18 uf 0.15 uf 0.10 uf frequency (khz) 1 100 1000 10 1 100 effective value (v) permissible voltage ( at sine wave) 10
120 20 80 40 60 100
at 1khz 10 at 1khz at dc 100v ecwu (c) type dc250v series temperature characteristics frequency characteristics electrical characteristics < typical data > ( stacked metallized film) frequency (khz) temperature (degree c) frequency (khz) temperature (degree c) frequency (khz) temperature (degree c) -10 -5 0 5 10 1 10 100 1000 10000 0. 10 uf 1.0 uf 0. 010 uf 1000 pf 0 2 4 6 8 -60 -40 -20 0 20 40 60 80 100 120 140 from 1000pf to 1.0uf 0 2 4 6 8 10 1 10 100 1000 10000 0. 10 uf 1.0 uf 0. 010 uf 1000 pf 0.01 0.1 1 10 100 1000 10000 1 10 100 1000 10000 100000 0. 10 uf 1.0 uf 0. 010 uf 1000 pf -10 -5 0 5 10 -60 -40 -20 0 20 40 60 80 100 120 140 from 1000pf to 1.0uf 1. e+06 1. e+07 1. e+08 1. e+09 1. e+10 1. e+11 1. e+12 -60 -40 -20 0 20 40 60 80 100 120 140 1.0 uf from 1000pf to 0.10uf capacitance change(%) capacitance change(%) dissipation factor(%) dissipation factor(%) insuration resistance(ohm) impedance(ohm)
ecwu (c) type dc250v series applicable specifications ( stacked metallized film) * please consult panasonic if your condition exceeds the above spec. * the current( 0-p ) value is calculated using nominal capacitance. * permissible voltage graph is the case of sine waveform. when you use this product, peak voltage must not exceed dc rated voltage. permissible current permissible current ( at sine wave) ( at sine wave) frequency (khz) effective value (v) permissible voltage 10 0.1 100 1 0.1 10 1000 1 100 0.027 uf 1000 pf ~ ( at sine wave) frequency (khz) effective value (v) permissible voltage 10 0.1 100 1 0.1 10 1000 1 100 1.0 uf 0.033 uf ~ 0.027 uf 0.022 uf 0.018 uf 0.015 uf 0.010 uf , 8200pf 6800 pf 3900 pf 3300 up 2700 pf 2200 pf 1800 pf 1500 pf 0.012 uf 1200 pf 1000 pf 5600 pf , 4700pf frequency (khz) 10 100 1000 effective value (a) 0 1 0.5 1 0.068 uf , 0.082uf 0.10 uf 0.12 uf , 0.15uf 0.18 uf , 0.27uf 0.22 uf 0.33 uf 0.56 uf 0.68 uf , 0.39uf 0.47 uf 0.82 uf 1.0 uf 0.056 uf 0.047 uf 0.033 uf 0.039 uf frequency (khz) 0.1 10 1000 2 0 3 effective value (a) 1 100 1
ecwu (c) type pulse handling capability ( dv / dt ) (max 10000cycles) dc250v series applicable specifications ( stacked metallized film) * please consult panasonic if your condition exceeds the above spec. * the current( 0-p ) value is calculated using nominal capacitance. * permissible voltage graph is the case of sine waveform. when you use this product, peak voltage must not exceed dc rated voltage. dv / dt (v/us) capacitance value( uf ) code rating voltage current( 0-p ) (a) dc 250v dv / dt (v/us) 240 capacitance value( uf ) 0. 039 0. 047 0. 056 0. 068 0. 082 code 393 473 563 683 823 rating voltage current( 0-p ) (a) 9.36 11.28 13.44 16.32 19.68 dc 250v 190 0.10 0. 12 0. 15 0. 18 0. 22 104 124 154 184 224 24.00 28.80 28.50 34.20 41.80 115 65 0. 27 0. 33 0. 39 0. 47 0. 56 274 334 394 474 564 31.05 37.95 44.85 54.05 36.40 0. 68 684 44.20 0. 82 824 53.30 1.0 105 65.00 615 0. 0010 0. 0012 0. 0015 0. 0018 0. 0022 102 122 152 182 222 0.62 0.74 0.92 1.11 1.35 360 0. 0027 0. 0033 0. 0039 0. 0047 0. 0068 272 332 392 472 562 1.66 2.03 2.40 1.69 2.02 0. 0082 0. 010 0. 012 0. 015 0. 018 682 822 103 123 153 2.45 2.95 3.60 4.32 5.40 0. 022 183 6.48 0 .027 223 7.92 0.033 273 9.72 333 11.88 0. 0056 voltage derating by temperature surface temperature of capacitor(degree c) -60 40 -40 -20 0 20 60 80 100 120 140 dc rated voltage (v) 0 100 150 250 300 50 200 125
dc630v series (stacked metallized film) -10 -5 0 5 10 1 10 100 1000 10000 0.033uf 0.022uf -10 -5 0 5 10 -60 -40 -20 0 20 40 60 80 100 120 140 0.022uf, 0.033uf capacitance change(%) 0 1 2 3 4 5 -60 -40 -20 0 20 40 60 80 100 120 140 0.022uf, 0.033uf temperature characteristics frequency characteristics electrical characteristics 1.e+06 1.e+07 1.e+08 1.e+09 1.e+10 1.e+11 1.e+12 -60 -40 -20 0 20 40 60 80 100 120 140 0 2 4 6 8 10 1 10 100 1000 10000 0.033uf 0.022uf 0.01 0.1 1 10 100 1000 10000 1 10 100 1000 10000 100000 insulation resistance(ohm) dissipation factor(%) capacitance change(%) impedance(ohm) dissipation factor(%) at 1khz at 1khz at dc100v frequency(khz) temperature(degree c) frequency(khz) temperature(degree c) type: ecwu ( c ) frequency(khz) temperature(degree c) 0.022uf,0.033uf 0.033uf 0.022uf
140
panasonic caution about safety in use design specifications are subject to change without notice. ask factory for technical specifications before purchase and/or use. whenever a doubt about safety arises from this product, please inform us immediately for technical consultation withou t fail. sep. 2008 11 2.4.2 cautions for use of soldering iron be careful that the soldering irons do not directly touch the main body of the chip film capacitor. in particular, don?t touch the side (cut section). if touched by the heated soldering iron, lowering of insulation resistance, shortcircuit or other char acteristic deterioration may occur. preheat the printed wining board land sufficiently with the soldering iron, and then solder. solder without directly touching the iron tip to the electrode of the capacitor. don?t reuse the products once removed by the soldering irons. should not mount the chip film capacitors in the mass production by soldering iron. (the temperature control is difficult, and the characteristics may be deteriorated.) should not resolder with heat directly from bottom side of p. w. board. because capacitor will likely be damaged. 3. washing the mounted boards 3.1. washing of chip type since the chip type capacitor does not have a coating, components of fl ux or detergent left over on the element at the time of washing may be activated and invade into the inside of the capacitor, and adverse effects may be caused. observe the following cautions. in the case of washing, use flux and cream solder with halogen content of 0.1wt.% or less when mounting. in the case of ultrasonic washing, note that peeling of protective film, electrode separation due to resonance, or characteristic deterioration may occur depending on the detergent used or ultrasonic output. check carefully beforehand. when using a cfc substitute detergent, with the washing method of spraying detergent (rinsing water) to the substrate at high pressure, the protective film on the element surface may be peeled off due to the water pressure. check carefully beforehand. usable detergent and washing method (usable detergent classification detergent name maker alcohol derivative ipa (isopropyl alcohol) (reagent for general industrial use) halogenated hydrocarbon ak-225aes asahi glass co. (washing method) condition item temperature tine immersion washing 50 within 5 minutes steam washing 50 within 5 minutes ultrasonic washing 50 within 5 minutes as a result of regulation of cfc and chlorine derivative detergents, many substitute detergents come to be used, but the performance of the chip type capacitor may be reduced depending on the type of detergent or washing condition. check sufficiently beforehand. consult us in advance if planning to use cfc substitute detergent. dry after washing so that the det ergent is not left over. if drying is insufficient, the detergent is left over on the element surface, and the insula tion resistance is measured to be lowered. dry enough so as not to leave detergent. 3.2. washing of leaded type the film capacitor varies significantly in the effect of washing depending on the structure and material, and generally it is less affected by cfc or alcohol derivative washing solvent, and is likely to be affected by highly polar solvent. the lead type film capacitor is coated with an epoxy resin excellent in chemical resistance, and is hardly affected by detergent, but it is recommended to be washed for short duration. applicability of detergents in film capacitors is listed for reference.
panasonic caution about safety in use design ?c specifications are subject to change without notice. ask factory for technical specifications before purchase and/or use. whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. jul. 2011 ?| 12 ?| ?? list of applicability of detergents ?? box type washing condition chip type lead type ecqul ethanol ultrasonic washing or immersion washing for 5 min ?? ?? ?? alcohol isopropyl alcohol (ipa) ultrasonic washing or immersion washing for 5 min ?? ?? ?? silicon frw - 17 ultrasonic washing for 5 min, 60 ?? ?? frw - 1n ultrasonic washing for 5 min, 60 ?? ?? frw - 100 steam drying for 1 min, 100 ?? ?? ?? ?? asahi clean ak - 225aes ultrasonic washing or immersion washing for 5 min ?? ?? ?? halogen hcfc141b - ms ultrasonic washing or immersion washing for 5 min ?? ?? ?? p3 cold cleaner 225s ultrasonic washing for 5 min 60 ?? ?? ipa u ltrasonic rinsing for 5 min at ordinary temperature ?? hot air drying for 5 min, 40 ?? ?? ?? ?? petroleum hydrocarbon toluene ult rasonic washing or immersion washing for 5 min ?~ ?? ?? solvent terpene terpene cleaner ec - 7 spray washing fo r 5 min at ordinary temperature ?? purified water spraying for 5 min, 50 ?? ?? hot air drying for 5 min, 80 ?? ?~ ?? ?? purified water ultrasonic washin g for 5 min 60 ?? ?? wind - free drying for 5 min, 85 ?? ?~ ?? ?? clean through 750h ultrasonic washing for 5 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 min, 85 ?? ?~ ?? ?? clean through 750l ultr asonic washing for 5 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 min, 85 ?? ?~ ?? ?\ clean through 710m ultrasonic washing for 5 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 mi n, 85 ?? ?~ ?? ?\ clean through lc - 841 ultrasonic washing for 5 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 min, 85 ?? ?~ ?? ?? ultrasonic washing for 5 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 min, 85 ?? ?~ ?? ?? water surface active agent shower washing for 1 min, 60 ?? ?? purified water ultrasonic washing for 5 min, 60 ?? ?? hot air drying for 5 min, 85 ?? ?~ ?? ?? ?? : washing enabled ?~ : washing disabled ?\ : not confirmed ?? wash - free flux ?? low residue flux ulf - 500vs ?? ?? ?? wash - fre e inactivated flux am - 173 ?? ?? ?? washing disabled (x mark) detergent should be avoided because the appearance may be impaired, the characteristic may be deteriorated, and the reliability cannot be guaranteed

▲Up To Search▲

Price & Availability of ECWU1104V33

	To Download ECWU1104V33 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .